Tplink Router Connectivity Issues

TP-Link routers, which are known as the best routers for wireless connectivity, are extensively used at business and at home. These Wi-Fi routers allow several computers, notebooks, mobile phones, and tablets to share a single internet connection and print from several locations.

However, router users may have connection troubles such as no connection, limited connectivity, or disconnection. Let us dive into the depth and explore the causes of these network issues with this valuable essay in order to resolve such network issues.

How to fix the tplink router connectivity issues?

ISP issues:

When your ISP has a problem, your access point or wireless router instantly disconnects you from the Internet. Messages such as ‘No Connection’ or ‘Limited’ are commonly used to signal this issue. When you connect directly or through a TP-Link router, the same thing happens.

Wait and see if the wifi connection spontaneously repairs itself in such circumstances. If there is no connectivity, reset the modem and try again. If the problem with connectivity persists, contact your ISP. The Internet may work perfectly at the AP/Modem end, but there are problems with the router.

Weak signals:

If your router is connected via LAN, make sure there are no loose connections and that the cables are correctly linked. If the router is linked by Wireless WAN (Wi-Fi), make sure it is properly located in a location that receives acceptable signals.

If your WAN signals aren’t strong enough, you won’t be able to have a stable Internet connection. Changing the router’s placement till it picks up the best signals is a good idea.

Ensure Bridging Configuration:

If you’re bridging (extending Wi-Fi or repeating) with extenders or repeaters, be sure you’re using the same password and network channel as your modem or access point.

The use of a different password and channel causes problems such as “no connectivity” or “restricted connectivity.” As a result, double-check that the WDS Bridge/Repeater settings match the Wi-Fi settings of the modem or access point. It makes no difference if you have two different SSIDs.

DNS:

If you’re having trouble with your TP Link connection, try using Google Public DNS, which is very effective in resolving the issue. You can do it in one of the following ways:

This DNS IP address should be configured in the router’s DHCP settings [DHCP > DHCP Settings > Primary DNS & Secondary DNS].
Change your LAN (Ethernet) or Wi-Fi connection settings to this DNS address [Control Panel > Network and Sharing Center > Change Adapter Settings].
To use DNS for an Ethernet or Wi-Fi connection, go to [Open Ethernet / Local Area Connection / Wi-Fi > Properties > Networking > Internet Protocol Version 4 (TCP/IPv4) > Properties > DNS (DNS) (DNS) (DNS) (DNS) (DNS) (DNS) (DNS) (DNS) (DNS) (DNS) (DNS) ( [Use the DNS server addresses listed below]

The DNS for Internet Protocol Version 6 (TCP/IPv6) can be altered, but if your ISP does not support IPv6, this may cause problems.

The following are the Google Public DNS IP Addresses:

IPv4:
8.8.8.8
8.8.4.4

IPv6:

2001:4860:4860::8888
2001:4860:4860::8844

Note: Select “Obtain DNS server address automatically” in your Ethernet or Wi-Fi settings while updating your DNS server in your router DHCP settings.

dhcp:

Limited or no connectivity issues are more common when utilizing a TP-Link router as a repeater, extender, WDS bridge (WDS stands for wireless range extension), or for connecting several computers across a LAN.

Due to IP conflicts, DHCP fails to assign IP addresses in such cases. When a firmware bug or incompatibility between linked devices develops, this problem occurs. Disable DHCP using the procedures below to remedy this connectivity issue:

  • In a web browser, go to 192.168.0.1 and log into your router’s configuration panel.
  • In the sidebar, select the DHCP tab. On your screen, you’ll see the DHCP settings.
  • Without changing any other settings, simply disable the DHCP option.
  • Restart the router to put the new settings into effect.
  • If you haven’t completed all of the necessary router configuration settings, you won’t be able to access it after disabling DHCP. The user must manually allocate an IP address to the PC that matches the router’s default IP address.

The saved router settings are immediately erased when you press the reset button on the router to reset it.

If you’ve tried everything to cure tp link router keeps disconnecting from internet and the problem still exists, it could be a hardware or router issue.

Related Topics

Tplink Router
Tplinkwifi.Net
Tplink Router Login
Tplink Router Setup
Tplink Router Password
Tplink Router Reset
Tplink Tether App
Tplink 192.168.1.1
Tplink Router Connectivity Issues
Tplink Router Configuration
Tp Link Firmware Upgrade